Fuji Xerox DocuCentre SC2020 Service Manual

05/2014
6-55
DC SC2020
General
6.3.7 NVM 744_Fusing Unit List
Version 1.1
6.3.7 NVM 744_Fusing Unit List
Table 1 NVM 744_Fusing Unit List
Chain-Link NVM Name
Default
Value
Minimum
value
Maximu
m value Description Unit
Write
Allowed/
Protected
Can be
initialized
744-001 B/W Plain S Setting Temperature 5 0 5 Control Table No.
0: 1-1, 1: 1-2, 2: 1-3, 3: 2-1, 4: 2-2, 5: 2-3
-O O
744-002 B/W Heavyweight S Setting Temperature 1 0 2 Control Table No.
0: 3-1: Heavyweight (Setting Temperature: L)
1: 3-2: Heavyweight (Standard)
2: 3-3: Heavyweight (Setting Temperature: H)
-O O
744-003 B/W Extra Heavyweight S Setting Temperature 2 0 2 Control Table No.
0: 4-1, 1: 4-2, 2: 4-3
-O O
744-004 F/C Plain S Setting Temperature 5 0 5 Control Table No.
0: 6-1, 1: 6-2, 2: 6-3, 3: 7-1, 4: 7-2, 5: 7-3
-O O
744-005 F/C Heavyweight S Setting Temperature 1 0 5 Control Table No.
0: 8-1: Heavyweight1 (Setting Temperature: L)
1: 8-2: Heavyweight (Standard)
2: 8-3: Heavyweight1 (Setting Temperature: H)
3: 6-1: Plain1 (Setting Temperature: L)
4: 6-2: Plain1 (Standard)
5: 6-3: Plain1 (Setting Temperature: H)
-O O
744-006 F/C Extra Heavyweight S Setting Temperature 2 0 2 Control Table No.
0: 9-1, 1: 9-2, 2: 9-3
-O O
744-007 Fusing Failure Individual Support Mode 12 0 15 Set the bit to "1" for the paper type on which to perform the individual support
mode.
Bit0: Plain 1
Bit1: Plain 2
Bit2: Heavyweight
Bit3: Extra Heavyweight
Bit4~7: Not used
-O O
744-012 Fusing Motor Speed Fine Adjustment
(126[mm/s]/Plain 1 = Plain AFG)
-140 -300 300 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio.
(126[mm/s]/Plain1) (-0.6%)
-O O
744-013 Fusing Motor Speed Fine Adjustment
(126[mm/s]/Plain 2 = Plain DEFG)
-140 -300 300 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio.
(126[mm/s]/Plain2) (-0.6%)
-O O
744-014 Fusing Motor Speed Fine Adjustment
(126[mm/s]/Plain S)
-232 -300 300 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio.
(126[mm/s]/PlainS) (-0.2%)
-O O
744-015 Fusing Motor Speed Fine Adjustment
(126[mm/s]/Heavyweight, Labels/BW)
-186 -300 300 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio.
(126[mm/s]/Heavyweight/BW) (-0.4%)
-O O
744-016 Fusing Motor Speed Fine Adjustment
(126[mm/s]/Gloss/BW)
-232 -300 300 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio.
(126[mm/s]/Gloss/BW) (-0.2%)
-O O
744-017 Fusing Motor Speed Fine Adjustment
(63[mm/s]/Heavyweight, Labels/FC)
-373 -600 600 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio.
(63[mm/s]/Heavyweight/FC) (-0.4%)
-O O
744-018 Fusing Motor Speed Fine Adjustment
(63[mm/s]/Gloss/FC)
-465 -600 600 NVM for Fusing Motor Speed Fine Adjustment. Adjust by setting the division ratio.
(63[mm/s]/Gloss/FC) (-0.2%)
-O O

Fuji Xerox DocuCentre SC2020 Specifications

General

Brand	Fuji Xerox
Model	DocuCentre SC2020
Category	All in One Printer
Language	English