05/2014
2-8
DC SC2020
2.1 Introduction
Version 1.1
Troubleshooting
Refer to Chain 6.2 Zone J4 in Chapter 7 BSD.
•REP 4.1.3
Refer to REP 4.1.3 in Chapter 4.
• ADJ 4.1.3
Refer to ADJ 4.1.3 in Chapter 4.
• Replace the parts in sequence
When it is impossible to analyze causes of a problem further, replace the parts in sequence. The
part with a higher replacement frequency or higher possibility of causing a problem is listed first for
replacement.
To Next Page
Loading...
