05/2014
6-26
DC SC2020
6.1.29 One Tray Module (Optional)
Version 1.1
General
6.1.29 One Tray Module (Optional)
*1: When using 80gsm Paper.
6.1.30 Billing Counter
6.1.30.1 Billing Counter
1. Type of Billing Counter
• There are 13 Billing Counters.
Billing Counter prepared specifically as Table 1.
O: Implement Billing Counter
X: Do not implement Billing Counter
2. Form of Billing Counter
• Two billing counter sets prescribed in the type of billing counter must be installed including the
back up. These billing counters are equipped on the following PWBA.
*1: Controller NVMs are stored in each of the two EEPROM which are physically separated.
*2: Continuous counting up is not performed. When the upper limit is reached, a system failure
occurs.
3. Billing meter
(1) Display of billing meter
• Displays the electronic Billing count value.
Table 1
Item Contents
Paper Size Conforms with the Basic Feature/Copy Feature
Paper Weight 60 to 256gsm
Paper Tray Capacity*1 500 sheets x 1 tray
Dimensions/ Weight W 541 x D 586 x H 113 mm, 11 kg
Table 1
Counter Type
Destination
APO/GCO
Full Color Print O
Full Color Copy O
Full Color FAX (APO/GCO) X
Color1 Print O
Color2 Print O
B&W Print O
B&W Copy O
B&W FAX O
Large Size Color O
Large Size B&W X
Modal Color X
Modal B&W X
Table 2
Stored in Counter upper limit
*2
Operation when the upper
limit is reached
Fail Occurs
ESS PWB1*1 1,000,000 117-347
ESS PWB2*1 1,000,000 117-347
To Next Page
Loading...
