Fuji Xerox DocuCentre SC2020

05/2014
2-38
DC SC2020
CHAIN 24
Version 1.1
Troubleshooting
Cause/Action
Check the following:
• Is the paper size correct?
• Usage of out of spec paper.
• Malfunction of Tray Size Guide.
• Malfunction of Tray 2 Size Sensor (Analog Input[072-200]/Digital Input[072-104]). (PL 10.1)
If no problem is found, replace the following parts in sequence:
• STM PWB (PL 10.6)
• DRIVE PWB (PL 18.2)
• ESS PWB (PL 18.2)