Fuji Xerox DocuCentre SC2020

05/2014
6-206
DC SC2020
6.4.7.5 MAC+PHY Test
Version 1.1
General
6.4.7.5 MAC+PHY Test
MAC+PHY Test allows you to perform the loopback test for MAC (Media Access Control) and PHY
(Physical Layer).
6.4.7.6 ASIC Test
ASIC Test reads the device ID of the REMORA-EX via ZoranQuatro4530 and performs the Zoran
Quatro4530 and REMORA-EX tests.
Table 1 MAC+PHY Test
Display After Diag
Normal Error
CHECK OK MAC+PHY ERROR
Table 1 ASIC Test
Display After Diag
Normal Error
CHECK OK ASIC CHECK NG