4. Close the document feeder.
Figure 1-620 Close the document feeder
Step 7: Reset the rmware counter
1. From the Home screen on the control panel, scroll to and touch the Device Maintenance button.
2. Scroll to and touch the Service button.
3. On the sign-in screen, select the Service Access Code option from the drop-down list.
4. Enter the following service access code for this printer: 05058616.
5. Scroll to and touch the Cycle Counts Item.
6. Reset the following items:
●
Document Feeder Kit Interval; set to zero
●
ADF Count; set to zero
382 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...