Post service test
Make sure that the printer initializes to a Ready state.
Use the document feeder to copy a page to make sure that it is functioning correctly.
Step 1: Remove the document feeder pickup and feed roller assembly
NOTE: This guide shows the HP LaserJet Enterprise MFP M527. However, the instructions are also valid for
the HP PageWide Enterprise Color MFP 586.
1. Open the document feeder jam access door.
Figure 1-967 Open the door
2. Raise the blue lever to release the document feeder pickup and feed roller assembly.
Figure 1-968 Raise the blue lever
ENWW Removal and replacement procedures 583
To Next Page
Loading...