HP PageWide Enterprise Color 556 User Manual

Removal and replacement: Tray 2
●
Introduction
●
Step 1: Remove the tray
●
Step 2: Unpack the replacement assembly
●
Step 3: Install the tray
Introduction
This document provides the procedures to remove and replace Tray 2.
Before performing service
Turn the printer power o
◦
Disconnect the power cable.
WARNING! To avoid damage to the printer, turn the printer o, wait 30 seconds, and then remove the
power cable before attempting to service the printer.
Use the table below to identify the correct part number for your printer. To order the part, go to
www.hp.com/buy/parts.
Tray 2 part number
G1W39-67908 Cassette (Tray 2) assembly
Required tools
●
No special tools are required to remove this part.
After performing service
Turn the printer power on
◦
Connect the power cable.
◦
Use the power switch to turn the power on.
Post service test
Make sure that the printer initializes to a Ready state.
Print a conguration page (from Tray 2) to make sure that the printer is functioning correctly.
Step 1: Remove the tray
▲
Pull out the tray until it stops, lift the front of the tray, and then pull it out of the printer to remove it.
ENWW Removal and replacement procedures 575

HP PageWide Enterprise Color 556 Specifications

General

Print resolution (best)	1200 x 1200 DPI
Duplex printing	Yes
Ethernet LAN	Yes
Scanner Type	Flatbed, ADF
Fax Modem Speed	33.6 Kbps
Processor frequency	1.2 GHz
Mobile printing technologies	HP ePrint, Apple AirPrint, Mopria-certified, Google Cloud Print 2.0
Functions	Print
Maximum Scan Size	216 x 356 mm
Connectivity	USB, Ethernet, Wi-Fi
Operating System Compatibility	Windows, macOS, Linux
Print speed (black, normal quality, A4/US Letter)	Up to 75 ppm
Print Speed (Color)	Up to 75 ppm