2. Unpack the replacement part from the packaging.
CAUTION: If the replacement part is a roller or pad, avoid touching the spongy part of it. Skin oils on
the roller or pad can cause paper pickup and/or print-quality problems. HP recommends using
disposable gloves when handling rollers or pads or washing your hands or before touching rollers or
pads.
IMPORTANT: Make sure that all of the shipping materials (for example shipping tape) are removed
from the replacement part prior to installation.
Step 4: Install the output bin
1. Position the replacement output bin on the printer. Align the tabs (callout 1) on the output bin with the
slots (callout 2) in the top of the printer.
Figure 1-5 Align the tabs and slots
16 Chapter 1 Removal and replacement ENWW
To Next Page
Loading...