Removal and replacement procedures
Customer self-repair (CSR) A parts and assemblies
Customer Self-Repair (CSR) parts are available for many HP LaserJet printers to reduce repair time. More
information about the CSR program and benets can be found at www.hp.com/go/csr-support and
www.hp.com/go/csr-faq.
Genuine HP replacement parts can be ordered at www.hp.com/buy/parts or by contacting an HP-authorized
service or support provider. When ordering, one of the following will be needed: part number, serial number
(found on back of printer), printer number, or printer name.
●
Parts listed as A: Easy
●
Parts listed as B: Diicult and/or requires tools
NOTE: For a complete list of CSRs, see the customer self-repair kits table in the printer repair manual (parts
chapter).
●
Removal and replacement: Ink cartridges
●
Removal and replacement: Output bin
●
Removal and replacement: Document feeder retention clips (586)
●
Removal and replacement: Document feeder white backing (586)
●
Removal and replacement: Control panel (586)
●
Removal and replacement: Control panel keyboard (586z)
●
Removal and replacement: embedded MultiMedia Card (eMMC) (556dn)
●
Removal and replacement: Hard-disk drive (HDD)
ENWW Removal and replacement procedures 7