PM Process
●
Formatter cover
●
Formatter and formatter cage (and any installed accessories)
●
Power supply (and brackets)
●
Blank cover
●
Integrated scanner assembly (ISA)
NOTE: The ISA includes the image scanner, document feeder, control panel, and keyboard (MFP 586z
only).
Required tools
This process requires the following tools:
●
Torx driver (#10) with magnetized tip
●
Phillips screwdriver (#2), 152 mm (6 in) shaft (with magnetized tip)
●
Small at-blade screwdriver
●
Optional: Small pliers (for holding clips during disassembly
ENWW Removal and replacement procedures 517
To Next Page
Loading...