2. Position the ISA on the printer.
CAUTION: The ISA is bulky and heavy. Do not drop the ISA.
IMPORTANT: Keep the front of the ISA tilted up so the cables and wire harness are not damaged.
Figure 1-913 Install the ISA
3. With the front of the ISA tilted up, pass the wire harnesses and cables through the opening in the ISA
chassis.
CAUTION: The ISA is not captive on the printer base. Do not let it fall o of the printer base.
Figure 1-914 Pass the wire harnesses and cables through the opening
ENWW Removal and replacement procedures 549
To Next Page
Loading...