Ricoh Pro 8300S - Perfect Binder: Master EEPROM Read Error; Perfect Binder: Master EEPROM Write Error; Sc750-15; Sc750-16

1.SC Codes
319
Error Condition
Cutter control board could not communicate with the slave control board (communication alarm for over
5 sec.)
Major Cause
 Slave Control Board defective
 Cutter control board defective
 Connector loose, damaged, or defective.
Solution
 Reconnect the connector.
 Replace the slave control board.
 Replace the cutter control board.
 Replace the harness.
SC750-15
Error Name
Perfect Binder: Master EEPROM Read Error
Pattern
D
Error Condition
Data written to the EEPROM does not match data read from the EEPROM
Major Cause
 EEPROM defective
Solution
 Replace the master control board EEPROM
 Replace the master control board.
SC750-16
Error Name
Perfect Binder: Master EEPROM Write Error
Pattern
D