Ricoh Pro 8300S - Sc845-51; Sc855-01; Wireless LAN Board Error

1.SC Codes
603
Major Cause
Hardware error: DIMM/HDD is defective.
Or, the firmware package file on the SERES server is corrupted.
Solution
1. Replace the DIMM on the control board.
2. Replace the HDD.
SC845-51
Error Name
Hardware Error Detected At Automatic Firmware Update: Network Error, DIMM/HDD Error
Pattern
C
Error Condition
Firmware package was received in preparation for automatic firmware update, Zoo, or SFU, but the
compressed file could not be extracted.
The machine can be used after reboot, but the same error (extraction failure) occurs at the next
automatic firmware update.
Major Cause
 Network problem at the customer environment
 Hardware error: DIMM/HDD defective
 The firmware package file on the SERES server is corrupted.
Solution
1. Receive the firmware package again.
2. Replace the DIMM on the controller board.
3. Replace the HDD.
SC855-01
Error Name
Wireless LAN Board Error
Pattern
B
Error Condition
Wireless LAN board error is detected (wireless LAN card: 802.11)