Ricoh Pro 8300S - Perfect Binder: Cutter Rear HP Sensor Late Error; Sc750-62

1.SC Codes
343
time elapsed for 10 mm of movement.
Major Cause
 Cutter motor defective
 Blade sensors 1, 2 defective
 Motor/sensor disconnected
 Overload
Solution
 Reconnect the connector.
 Replace the cutter motor.
 Replace the blade sensors 1, 2.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
SC750-62
Error Name
Perfect Binder: Cutter Rear HP Sensor Late Error
Pattern
D
Error Condition
When the blade was moved to the rear, it did not arrive at the home position after 122 mm of
movement.
Major Cause
 Cutter motor defective
 Blade sensors 1, 2 defective
 Motor/sensor disconnected
 Overload
Solution
 Reconnect the connector.
 Replace the cutter motor.
 Replace the blade sensors 1, 2.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.