Ricoh Pro 8300S - Sc752-89

1.SC Codes
456
 Clear the signature jam.
After the repairs, cancel the low performance mode, and then turn the power OFF/ON.
SC752-89
Error Name
Perfect Binder: Right Trimming Buffer HP Sensor Late Error
Pattern
B
Error Condition
The right trimmings buffer HP sensor did not go ON within 5 sec. after the trimmings buffer moved
toward the sensor.
Major Cause
 Buffer full of trimmings
 Trimmings buffer motor defective
 Motor connector loose, damaged, ordefective
 Right trimmings buffer HP sensor defective
Solution
 Reconnect the connector.
 Replace the trimmings buffer motor.
 Replace the right trimmings buffer HP sensor.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
 Clear the signature jam.
After the repairs, cancel the low performance mode, and then turn the power OFF/ON.