EasyManua.ls Logo

Ricoh Pro 8300S - EEPROM Read Data Error; Nand-Flash Updating Verification Error; Sc841-00; Sc842-00

Ricoh Pro 8300S
963 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1.SC Codes
600
SC841-00
Error Name
EEPROM Read Data Error
Pattern
D
Error Condition
Mirrored data of the EEPROM is different from the original data in EEPROM.
Major Cause
Data in the EEPROM is overwritten.
Solution
Replace the controller board.
SC842-00
Error Name
Nand-Flash Updating Verification Error
Pattern
C
Error Condition
SCS write error (verify error) occurred at the Nand-Flash module when remote ROM or main ROM was
updated.
Major Cause
Nand-Flash is defective.
Solution
Turn the main power OFF/ON.
SC842-01
Error Name
Insufficient Nand-Flash Blocks (Threshold Exceeded)
Pattern
C

Table of Contents

Other manuals for Ricoh Pro 8300S

Related product manuals