Ricoh Pro 8300S - Perfect Binder: Sub Grip HP Late Error; Perfect Binder: Sub Grip HP Position Lag Error; Sc752-35; Sc752-36

1.SC Codes
424
SC752-35
Error Name
Perfect Binder: Sub Grip HP Late Error
Pattern
D
Error Condition
While moving to the sub grip home position, the sub grip HP sensor did not go ON, even though the
sub grip motor had operated for 3000 ms.
Major Cause
 Sub grip motor defective
 Sub grip HP sensor defective
Solution
 Reconnect the connector.
 Replace the signature movement motor.
 Replace the signature movement HP sensor.
 Replace the slave control board.
 Replace the motor harness.
 Replace the sensor harness.
SC752-36
Error Name
Perfect Binder: Sub Grip HP Position Lag Error
Pattern
D
Error Condition
While passing the signature, the sub grip HP sensor did not go OFF, even though the sub grip motor
had operated for 500 ms.
Major Cause
 Sub grip motor defective
 Sub grip HP sensor defective
 Connector harness loose, damaged, or defective