Ricoh Pro 8300S - Perfect Binder: Book Rotation HP Sensor (Right) Late Error; Sc750-58

1.SC Codes
340
Pattern
D
Error Condition
 The book rotation HP sensor does not go OFF after the book was rotated 60 degrees.
 The book rotation HP sensor does not go OFF after the book was rotated 30 degrees.
Major Cause
 Book rotation motor 1 (right) defective
 Book rotation HP sensor (right) defective
 Overload
 Motor/sensor disconnected
 Book jam
Solution
 Reconnect the connector.
 Replace the book rotation motor 1 (right)
 Replace the book rotation HP sensor (right)
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
 Clear the signature jam.
SC750-58
Error Name
Perfect Binder: Book Rotation HP Sensor (Right) Late Error
Pattern
D
Error Condition
 The book rotation HP 1 (right) sensor does not go ON after the book was rotated 440 degrees.
 The book rotation HP 1 (right) sensor does not go ON after the book was rotated 400 degrees.
 The book rotation HP 1 (right) sensor does not go ON after the book was rotated 360 degrees.
Major Cause
 Book rotation motor 1 (right) defective
 Book rotation HP sensor (right) defective,
 Overload
 Motor/sensor disconnected