Ricoh Pro 8300S - Perfect Binder: Cover Guide HP Sensor (Left) Late Error; Perfect Binder: Sstack Weight HP Sensor Lag Error; Sc752-17; Sc752-18

1.SC Codes
413
 Stack weight motor defective
Solution
 Reconnect the connector.
 Replace the stack weight motor.
 Replace the stack weight HP sensor defective.
 Replace the master control board.
 Replace the motor harness.
 Replace the sensor harness.
SC752-17
Error Name
Perfect Binder: SStack Weight HP Sensor Lag Error
Pattern
D
Error Condition
During movement away from the HP sensor, the HP sensor did not go OFF after enough time for 10
mm of movement had elapsed.
Major Cause
 Stack weight HP sensor defective
 Stack weight motor defective
Solution
 Reconnect the connector.
 Replace the stack weight motor.
 Replace the stack weight HP sensor defective.
 Replace the master control board.
 Replace the motor harness.
 Replace the sensor harness.
SC752-18
Error Name
Perfect Binder: Cover Guide HP Sensor (Left) Late Error
Pattern
D