Ricoh Pro 8300S - If the Paper Shifted Towards the Front; If the Paper Shifted Towards the Rear

4.Troubleshooting for Peripheral Units
791
1. Deliver some A3/DLT or A4 LEF paper onto the proof tray. Check how much the edge of the paper
has shifted from the center scale.
 If the paper shifted towards the front
Slide the docking bracket towards the front side by the amount of shift, in order to move the
finisher in the same direction.
For example, when the paper has shifted by 4 mm towards the front from the center mark (2
mm/division of the scale), move the docking bracket towards the front by 4 mm (2 divisions).
The divisions move towards the rear.
[A]: Proof tray
[B]: Docking Bracket Screw
 If the paper shifted towards the rear
Slide the docking bracket towards the rear by the amount of shift, in order to move the finisher