3.Paper Delivery Problems
728
If the problem persists, consult the product specialist.
ï‚· To use the decurl unit, specify Adjust Paper Curl On the machine operation panel: Paper Feed/
Output group on the Adjustment Settings for Skilled Operators menu. (SP 1-906-001 to 012:
De-curler Setting Tray <number> :Paper Path Selection)
Output Sheets Are Curled Greatly
ï‚· The machine controls the curl correction setting for each tray separately. If sheets of paper are
delivered from one tray, then sheets are delivered from another tray for which the machine
sets the curl correction setting to the opposite direction, the productivity may decrease
because the machine requires time for switching the path.
If convex curling or concave curling occurs on ejected sheets, you can prevent output sheets from
being curled by using the decurler unit.
ï‚· [A]: Convex curling
ï‚· [B]: Concave curling
Solution:
Perform the curl correction from the control panel.
Flowchart for Paper Curl Correction
To Next Page
Loading...
Need help?
General
