Ricoh Pro 8300S - Perfect Binder: Book Rotation HP Sensor (Left) Lag Error; Sc750-59

1.SC Codes
341
 Book jam
Solution
 Reconnect the connector.
 Replace the book rotation motor 1 (right)
 Replace the book rotation HP sensor (right)
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
 Clear the signature jam.
SC750-59
Error Name
Perfect Binder: Book Rotation HP Sensor (Left) Lag Error
Pattern
D
Error Condition
 The book rotation HP sensor 2 (right) does not go OFF after the book was rotated 50 degrees.
 The book rotation HP sensor 2 (left) does not go OFF after the book was rotated 20 degrees
toward the cutting position.
Major Cause
 Book rotation motor 2 (left) defective
 Book rotation HP sensor 2(left) defective
 Overload
 Motor./sensor disconnected
 Book jam
Solution
 Reconnect the connector.
 Replace the book rotation motor 2 (left).
 Replace the book rotation HP sensor 2(left).
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
 Clear the signature jam.