2.Image Quality Problems
635
5. Clean the rollers, sensors, and guide boards. (Cleaning the Paper Feed Path)
6. After cleaning, restore the machine so that it resumes operation.
Two 14-mm Wide Streaks
Two 14-mm wide streaks parallel to the paper feed direction appear.
Cause:
The exit drive rollers, exit idle rollers, exit relay drive rollers, or exit relay idle rollers in the drawer are
dirty.
Solution:
Clean the rollers, sensors, and guide boards in the drawer.
1. Make sure that power is turned to OFF, and the machine power cord is disconnected from the
power source.
2. Open the front covers.
To Next Page
Loading...
