Ricoh Pro 8300S - Perfect Binder: Cover Guide HP Sensor (Left) Error; Sc752-19

1.SC Codes
414
Error Condition
During movement toward the HP sensor of the left cover path, the cover guide HP sensor (left) did not
go ON after the cover guide motor (left) had operated long enough for 3000 ms of movement.
Major Cause
 Cover guide (left) HP sensor defective
 Cover guide motor (left) defective
Solution
 Reconnect the connector.
 Replace the cover guide motor (left).
 Replace the cover guide (left) HP sensor.
 Replace the master control board.
 Replace the motor harness.
 Replace the sensor harness.
SC752-19
Error Name
Perfect Binder: Cover Guide HP Sensor (Left) Error
Pattern
D
Error Condition
The cover guide HP sensor (left) and cover guide (left) open sensor went ON at the same time.
Major Cause
 Cover guide HP sensor (L) defective
 Cover guide open sensor (left)
 Harness connector loose, damaged, or defective
Solution
 Reconnect the connector.
 Replace the cover guide HP sensor (L).
 Replace the cover guide open sensor (left).
 Replace the master control board.
 Replace the sensor harness.