Ricoh Pro 8300S - Perfect Binder: Grip HP Sensor Late Error; Sc750-38

1.SC Codes
327
Error Condition
The grip HP sensor did not OFF after grip unit moved 20 mm.
Major Cause
 Grip motor defective
 Grip HP sensor defective
 There is overload
 Sensor flag defective
 Connector damaged or defective
Solution
 Reconnect the connector.
 Replace the grip motor.
 Replace the grip HP sensor.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
SC750-38
Error Name
Perfect Binder: Grip HP Sensor Late Error
Pattern
D
Error Condition
The HP sensor does not go ON after the grip unit was released and moved 76 mm.
Major Cause
 Grip motor defective
 Grip HP sensor defective
 There is overload
 Sensor flag defective
 Connector damaged or defective
Solution
 Reconnect the connector.
 Replace the grip motor.
 Replace the grip HP sensor.
 Replace the cutter control board.