Ricoh Pro 8300S - 875-01: Delete All Error (HDD Clear) (Hddchack-I Error); 875-02: Delete All Error (HDD Clear) (Data Deletion Failure); Sc875-01, 02; Sc877-00

1.SC Codes
615
Solution
 Turn the main power OFF and ON. Then repeat "Erase All Memory" in UP mode. (However, if there
is a defective sector or other problem with the hard disk, the error will recur.)
 Install the Erase All Memory option.
SC875-01, 02
Error Name
 875-01: Delete All Error (HDD Clear) (hddchack-i error)
 875-02: Delete All Error (HDD Clear) (Data deletion failure)
Pattern
D
Error Condition
An error was detected before HDD/data erasure starts. (Failed to erase data/failed to logically format
HDD)
Major Cause
 HDD logical formatting has failed.
 The modules failed to erase data.
Solution
Turn the main power OFF and ON.
SC877-00
Error Name
Data Overwrite Security Card Error
Pattern
B
Error Condition
Auto Erase Memory function of the Data Overwrite Security option is enabled but it cannot be done.
Major Cause
 Data Overwrite Security option SD card is damaged.
 Data Overwrite Security option SD card has been removed.
Solution
 If the SD card is damaged, prepare a new Data Overwrite Security option SD card and replace the