Ricoh Pro 8300S - Perfect Binder: Glue Vat HP Sensor Lag Error; Perfect Binder: Glue Vat HP Sensor Late Error; Sc751-48; Sc751-49

1.SC Codes
382
 Replace the signature thickness sensor.
 Replace the master control board EEPROM
 Replace the slave control board.
 Replace the master control board.
 Replace the VR harness.
SC751-48
Error Name
Perfect Binder: Glue Vat HP Sensor Late Error
Pattern
D
Error Condition
 The glue vat HP sensor (rear) did not go ON when the glue vat roller motor initialized at power on
and remained on for 4240 ms.
 When the glue vat HP sensor (rear) moved from the HP to the front, the glue vat HP sensor was
already OFF.
Major Cause
 Glue vat roller motor connector loose, damaged, or defective
 Motor defective
 Glue vat HP sensor connector loose, damaged, or defective
 Sensor defective
Solution
 Reconnect the connector.
 Replace the glue vat roller motor.
 Replace the glue vat HP sensor.
 Replace the slave control board.
 Replace the motor harness.
 Replace the sensor harness.
SC751-49
Error Name
Perfect Binder: Glue Vat HP Sensor Lag Error
Pattern
D