Ricoh Pro 8300S - Sc874

1.SC Codes
614
Solution
Replace the sensor.
SC874
Error Name
 874-05: Delete All Error (Delete Data Area) : Read Error
 874-06: Delete All Error (Delete Data Area) : Write Error
 874-09: Delete All Error (Delete Data Area) : No Response from HDD
 874-10: Delete All Error (Delete Data Area) : Error in Kernel
 874-12: Delete All Error (Delete Data Area) : No Designated Partition
 874-13: Delete All Error (Delete Data Area) : No Device File
 874-14: Delete All Error (Delete Data Area) : Start Option Error
 874-15: Delete All Error (Delete Data Area) : No Designated Sector Number
 874-16: Delete All Error (Delete Data Area) : Failure in Performing HDD Erase
 874-41: Delete All Error (Delete Data Area) : Other Fatal Errors
 874-42: Delete All Error (Delete Data Area) : End by Cancellation
 874-61: Delete All Error (Delete Data Area) : Library Error
 874-62: Delete All Error (Delete Data Area) : Library Error
 874-63: Delete All Error (Delete Data Area) : Library Error
 874-64: Delete All Error (Delete Data Area) : Library Error
 874-65: Delete All Error (Delete Data Area) : Library Error
 874-66: Delete All Error (Delete Data Area) : Unavailable
 874-67: Delete All Error (Delete Data Area) : Erasing Not Finished
 874-68: Delete All Error (Delete Data Area) : HDD Format Failure (Normal)
 874-69: Delete All Error (Delete Data Area) : HDD Format Failure (Abnormal)
 874-70: Delete All Error (Delete Data Area) : Unauthorized Library
 874-99: Delete All Error (Delete Data Area) : Other Errors
Pattern
D
Error Condition
An error occurred when data is erased from the HDD or NVRAM.
Major Cause
 Error in the HDD data erase program
 Error in the NVRAM data erase program
 The Erase All Memory option is not installed.