Ricoh Pro 8300S - Machine Serial Number Error; Sc195-00

1.SC Codes
47
SC195-00
Error Name
Machine Serial Number Error
Pattern
D
Error Condition
This error is detected when the 11-digit machine serial number is incorrect.
Major Cause
 Machine serial number was not entered or entered incorrectly
 EEPROM on the BiCU board replacement failure
 EEPROM on the BiCU board is defective.
 BiCU is defective.
Solution
1. Machine serial number not entered or entered incorrectly
Enter/re-enter the machine serial number. (SP5-811-004)
2. Set the EEPROM on the BiCU board again.
3. Replace the EEPROM on the BiCU board.
4. Replace the BiCU board.