Ricoh Pro 8300S - Perfect Binder: Book Rotation HP Sensor (Right) Lag Error; Perfect Binder: Slide HP Sensor Late Error; Sc750-56; Sc750-57

1.SC Codes
339
Solution
 Reconnect the connector.
 Replace the slide motor.
 Replace the slide HP sensor.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
 Clear the signature jam.
SC750-56
Error Name
Perfect Binder: Slide HP Sensor Late Error
Pattern
D
Error Condition
The slide HP sensor does not go ON after the slide was lowered and moved 180 mm.
Major Cause
 Slide motor defective
 Slide HP sensor defective
 Overload
 Motor/sensor disconnected
 Book jam
Solution
 Reconnect the connector.
 Replace the slide motor.
 Replace the slide HP sensor.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
 Clear the signature jam.
SC750-57
Error Name
Perfect Binder: Book Rotation HP Sensor (Right) Lag Error