Ricoh Pro 8300S - Image out of Position; Paper Feed Problems Affecting Image Quality

3.Paper Delivery Problems
719
Paper Feed Problems Affecting Image Quality
Image Out of Position
[A]
Original
[B]
Output
Cause:
Depending on the paper thickness, floppiness, edge roughness, and curl, the image may fall out of
alignment.
Solution:
Adjust the image position.
If custom paper is used
In Advanced Settings for the custom paper in use, adjust the image position.
Side 1
 1101-01: Image Position: Side 1: Across Feed
 1101-02: Image Position: Side 1: With Feed
Side 2
 1101-03: Image Position: Side 2: Across Feed
 1101-04: Image Position: Side 2
If custom paper is not used
On the machine operation panel: Adjustment Settings for Skilled Operators > Image Position > Adjust
the image position.
 To adjust the position horizontally, change the value in Adjust Image Position With Feed Direction.
(SP1-001-001 to 009: Lead Edge Reg Thick <number>)
 To adjust the position vertically, change the value in Adjust Image Position Across Feed Direction.
(SP1-003-001 to 013: Side-to-Side Reg Tray <number>)
 If the problem persists even though you have adjusted the setting to its maximum and minimum
values, consult the product specialist.