1.SC Codes
627
2. Check if the combination of downloaded programs is correct.
SC998-00
Error Name
Application Start Error
Pattern
D
Error Condition
No application was registered to system within a specified time after the main power was turned on.
(No application starts/all applications have been terminated abnormally)
Major Cause
ï‚· Application started but cannot be rendered for some reason.
ï‚· Software bug (mainly of the application)
ï‚· The optional RAM, DIMM, boards required by the application program are not installed correctly.
Solution
ï‚· Turn the main power OFF/ON.
ï‚· Check the optional RAM, DIMM, boards.
ï‚· Check the combination of programs.
ï‚· Replace the controller board.
To Next Page
Loading...
Need help?
General
