Ricoh Pro 8300S - Sc754-15

1.SC Codes
511
Major Cause
 Front door solenoid defective
 Front door lock release sensor defective
 Connector loose, damaged, or defective
 Master control board defective
Solution
 Reconnect the connector.
 Replace the front door solenoid.
 Replace the front door lock release sensor.
 Replace the master control board.
 Replace the solenoid harness.
 Replace the sensor harness.
After the repairs, cancel the low performance mode, and then turn the power off/on.
SC754-15
Error Name
Perfect Binder: Front Door Lock Release Error
Pattern
B
Error Condition
The front door lock release sensor did not go ON, even though the door was unlocked.
Major Cause
 Front door solenoid defective
 Front door lock release sensor defective
 Connector loose, damaged, or defective
 Master control board defective
Solution
 Reconnect the connector.
 Replace the front door solenoid.
 Replace the front door lock release sensor.
 Replace the master control board.
 Replace the solenoid harness.
 Replace the sensor harness.
After the repairs, cancel the low performance mode, and then turn the power off/on.