Ricoh Pro 8300S - Adjust the Image Scaling; Image Scaling Error on Side 1 of the Paper

3.Paper Delivery Problems
720
Image Scaling Error on Side 1 of the Paper
[A]
Original
[B]
Output
Cause:
An image scaling error may occur because of expansion or contraction of the paper.
Solution:
Adjust the image scaling.
1. In Advanced Settings for the custom paper in use, adjust the image scaling.
 SP1-101-06: Image Position: Side 1: Across Feed
 SP1-101-07: Image Position: Side 1: With Feed
Press [+] to increase the scaling and [-] to decrease it.
2. When user setting paper is not used, adjust the image scaling in the following items.
 SP2-102-041: Face Main Mag set & Adj
 SP2-102-042: Face Sub Mag set & Adj
3. Print the image. Is the problem resolved?
Yes
Finished!
No
If the problem persists even though you have adjusted the setting to its maximum and
minimum values, consult the product specialist.