Ricoh Pro 8300S - Image Scaling Error on Side 2 of the Paper

3.Paper Delivery Problems
721
Image Scaling Error on Side 2 of the Paper
[A]
Original
[B]
Output
[C]
Side 1
[D]
Side 2
Cause:
An image scaling error on side 2 of the paper may occur because the paper expands or contracts after
the image on side 1 of the paper has been fused.
Solution:
Adjust the scaling for side 2 of the paper and minimize the difference in print size between side 1 and
side 2.
1. In Advanced Settings for the custom paper in use, adjust the image scaling.
 SP1-101-08: Image Position: Side 2: Across Feed
 SP1-101-09: Image Position: Side 12: With Feed
Press [+] to increase the scaling and [-] to decrease it.
2. When user setting paper is not used, adjust the image scaling in the following items.
 SP2-102-043: Verso Main Mag set & Adj
 SP2-102-044: Verso Sub Mag set & Adj
3. Print the image. Is the problem resolved?
Yes
Finished!
No
If the problem persists even though you have adjusted the setting to its maximum and
minimum values, consult the product specialist.