Ricoh Pro 8300S - Perfect Binder: Front Door Force Open Error; Perfect Binder: Front Door Lock Release Error; Sc751-68; Sc751-69

1.SC Codes
395
 Replace the SOL harness.
 Replace the sensor harness.
SC751-68
Error Name
Perfect Binder: Front Door Lock Release Error
Pattern
D
Error Condition
The front door lock release sensor did not go ON, even though the door was unlocked.
Major Cause
 Front door lock solenoid defective
 Front door lock release sensor defective
 Connector loose, broken, defective
Solution
 Reconnect the connector.
 Replace the front door lock solenoid.
 Replace the front door lock release sensor.
 Replace the master control board.
 Replace the SOL harness.
 Replace the sensor harness.
SC751-69
Error Name
Perfect Binder: Front Door Force Open Error
Pattern
D
Error Condition
The front door was detected open, even though it was locked.
Major Cause
 Front door switch defective
 Front door solenoid defective
 Connector loose, damaged, or defective