Ricoh Pro 8300S - Perfect Binder: Book Collection Buffer HP Sensor Error; Perfect Binder: Book Collection Buffer Tray HP Sensor Late Error; Sc750-48; Sc750-49

1.SC Codes
334
 Replace the sensor harness.
 Clear the signature jam.
SC750-48
Error Name
Perfect Binder: Book Collection Buffer HP Sensor Error
Pattern
D
Error Condition
The book collection buffer HP sensor does not go OFF within the time prescribed for releasing the book
in the book buffer.
Major Cause
 Book buffer tray motor defective
 Book collection buffer tray HP sensor defective
 Overload
 Connector damaged or defective
 Blocked by paper scraps
Solution
 Reconnect the connector.
 Replace the book buffer tray motor.
 Replace the book collection buffer tray HP sensor.
 Replace the cutter control board.
 Replace the motor harness.
 Replace the sensor harness.
 Clear the signature jam.
SC750-49
Error Name
Perfect Binder: Book Collection Buffer Tray HP Sensor Late Error
Pattern
D
Error Condition
The book collection buffer HP sensor does not go off even after the book buffer tray moved for 3 sec.