2.Image Quality Problems
632
Solution:
1. Print 350 full-page, solid-fill A3 or DLT sheets.
2. Check the image. Is the problem resolved?
Replace the toner bottle.
3. Print 350 full-page, solid-fill A3 or DLT sheets.
4. If the problem persists, consult the product specialist.
Streaks (4)
Streaks appear over the entire paper surface after the machine was on Standby for a long period of
time.
Cause:
During Standby, the hot roller and pressure roller are rotated at intervals in order to maintain the fusing
temperature. This rotation can cause a small amount of friction between the pressure roller and
cleaning web, causing tiny scratches on the surface of the pressure roller, and particles to collect on the
web. These minute particles on the surface of the web can transfer to the paper surface and cause
black streaks in images.
Solution:
To Next Page
Loading...
