4.Troubleshooting for Peripheral Units
833
2. Strong friction occurs at the trailing edge so that the paddle cannot pull the sheet back and align
the edges of the sheet with those of the stack.
3. The paper edge stopper fails to push back the protruding leading edge and align the sheet as
required.
4. Stacked sheets are not aligned properly.
Action
1. Load the sheets the other way up.
2. Print the image. Was the problem resolved?
Yes: Finish
No: Go to next step.
3. In the [Adjustment Settings for Operators] menu, set [0301: Correct Output Paper Curl: 1 Sided:
Face Up] to [Small].
4. Print the image. Was the problem resolved?
Yes: Finish
To Next Page
Loading...
