Rohde & Schwarz RTP Series - Page 1834

Remote control commands
R&S
®
RTP
1834User Manual 1337.9952.02 ─ 12
MASR
Master Read command sequence. Optional: slave address con-
dition, register address condition, and data pattern condition.
MASW
Master Write command sequence. Optional: slave address con-
dition, register address condition, and data pattern condition.
MASOHO
Master Ownership Handover command sequence. Optional:
slave address condition, and data pattern condition.
MSKW
Masked Write command sequence. Optional: slave address con-
dition, register address condition, mask condition and data pat-
tern condition.
MCTW
Master Context Transfer Write command sequence. Optional:
MID condition, register address condition, byte count condition,
data index condition, and data pattern condition.
MCTR
Master Context Transfer Read command sequence. Optional
search conditions are the same as for MCTW
IRSUM
Interrupt Summary and Notification. Optional: slave address
condition, byte count condition, and data pattern condition.
ERRor
Searches for enabled errors. To enable the error types, use:
SEARch:TRIGger:RFFE:ERRor:LENGth
SEARch:TRIGger:RFFE:ERRor:PARity
SEARch:TRIGger:RFFE:ERRor:SSC
*RST:
STARt
Parameters for setting and query:
<SearchName> String parameter
Example: See "Searching RFFE data" on page 1140
To specify additional search conditions for command sequences, use the following
commands:
Slave address SEARch:TRIGger:RFFE:SADD:CONDition
SEARch:TRIGger:RFFE:SADD:MIN
SEARch:TRIGger:RFFE:SADD:MAX
Register address SEARch:TRIGger:RFFE:ADDRess:CONDition
SEARch:TRIGger:RFFE:ADDRess:MIN
SEARch:TRIGger:RFFE:ADDRess:MAX
Data pattern SEARch:TRIGger:RFFE:DATA:DCON
SEARch:TRIGger:RFFE:DATA:DMIN
SEARch:TRIGger:RFFE:DATA:DMAX
Protocols