Configuring the Internal Baseband Source
R&S
®
SMBV100B
163User Manual 1178.4460.02 ─ 03
Alternatively, use the "New" function to add the R&S SMBV100B manually to the
list of instruments.
4. Close the dialog.
5. In the block diagram, select "Vector Sig Gen" block and select the R&S SMBV100B
form the list.
6. In the block diagram, select "ARB Sig Gen" block and select the R&S SMBV100B
form the list.
The two lines to the "Vector Sig Gen" and "ARB Sig Gen" blocks on the block dia-
gram confirm that a remote connection to the R&S SMBV100B is established.
Using the Arbitrary Waveform Generator (ARB)
To Next Page
Loading...
