Configuring the RF Signal
R&S
®
SMBV100B
359User Manual 1178.4460.02 ─ 03
Trigger Mode
Selects between continuous triggering or triggering initiated by a trigger event from an
external signal.
See also "Input and output connectors" on page 348.
"Auto"
Generates the internal modulation signal continuously.
"Single"
The pulse generator is triggered by an internal trigger event, initiated
with Execute Single Trigger.
The pulse signal is generated once.
"Ext Single"
Generates a single pulse signal, triggered by an external signal.
Analog Modulations
To Next Page
Loading...
