Configuring the RF Signal
R&S
®
SMBV100B
391User Manual 1178.4460.02 ─ 03
The "Import/Export" dialog contains all functions and settings to import externally
created list data or to export it accordingly. You can process and store a list in the
formats *.txt (ASCII), or *.csv (plain text with identical sequence of fields). The
table separators and the decimal floating point numbers are customizable.
Settings
Mode .......................................................................................................................... 391
ASCII File Settings......................................................................................................391
Select (ASCII) Source/Select (ASCII) Destination...................................................... 391
Select Source/Select ASCII Destination..................................................................... 392
Import / Export.............................................................................................................392
Mode
Selects import or export of a data list file. The provided parameters vary according to
the selected mode.
Remote command:
[:SOURce<hw>]:LIST:DEXChange:MODE on page 862
[:SOURce<hw>]:CORRection:DEXChange:MODE on page 818
ASCII File Settings
Defines the format and the separators of the associated data file.
"Extension"
Selects *.csv or *.txt format.
"Decimal
Point"
Sets "Point" (dot) or "Comma" as the decimal separator used in the
ASCII data with floating-point numerals.
"Column Separator"
Sets the separator between the columns in an ASCII table.
Available are: "Tab", "Semicolon", "Comma" or "Space".
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:EXTension on page 861
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:DECimal on page 862
[:SOURce<hw>]:LIST:DEXChange:AFILe:SEParator:COLumn on page 862
[:SOURce<hw>]:CORRection:DEXChange:AFILe:EXTension on page 816
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:DECimal
on page 817
[:SOURce<hw>]:CORRection:DEXChange:AFILe:SEParator:COLumn
on page 817
Select (ASCII) Source/Select (ASCII) Destination
In "Mode > Import", access the file select dialog that provides standard file handling
functions.
Where:
●
"Select ASCII Source": defines the file to be loaded (imported)
●
"Select ASCII Destination": selects the filename under that the loaded file is saved
Remote command:
[:SOURce<hw>]:LIST:DEXChange:AFILe:CATalog? on page 861
[:SOURce<hw>]:LIST:DEXChange:AFILe:SELect on page 861
Improving Level Performance
To Next Page
Loading...
