File and Data Management
R&S
®
SMBV100B
479User Manual 1178.4460.02 ─ 03
Table 9-1: Key parameters affected by preset and factory preset
Parameter Preset value Preset Factory
Preset
RF frequency 1 GHz x x
RF level (RF output) off x x
RF OFF mode - - x
Offsets 0 x x
Modulation state off x x
Uninterrupted level settings off x x
Level attenuator mode auto x x
Level ALC (internal level control) auto x x
Level UCOR (user correction) off x x
LF output state off x x
Sweep state off x x
List mode state off x x
Reference frequency settings (reference oscillator) - - x
Power on settings (Level/EMF) - - x
Network settings - - x
Hostname - - x
GPIB address - - x
Start/Stop display update - - x
Display and keyboard settings - - x
Preset behavior: Keep connections to external instru-
ments
off - x
Password and settings protected by passwords (e.g. dis-
abled LAN or USB)
- - -
Security settings - - -
User files (setups
2)
, data lists, etc.)
- - -
●
2)
UserPreset.savrcltxt is renamed as UserPresetInactive.savrcltxt;
an existing file with the same name is overwritten.
If the default values in the "Remote Access" dialog had been changed, a factory preset
via remote control (:SYSTem:FPReset) terminates the connection to the instrument.
Security settings are never reset.
Resets all parameters and switching states, and closes all opened dialogs.
Restoring the (Default) Instrument Configuration
To Next Page
Loading...
