Rohde & Schwarz SMBV100B - Page 491

File and Data Management
R&S
®
SMBV100B
489User Manual 1178.4460.02 ─ 03
Remote command:
To list all files in a directory:
:MMEMory:CDIRectory on page 623
:MMEMory:CATalog? on page 622
Refer to the description of firmware options for the syntax of the corresponding SCPI
command:
[:SOURce<hw>]:BB:<Digital Standard>:SETTing:CATalog
[:SOURce]:CORRection:CSET:CATalog? on page 815
To list files with user data:
[:SOURce<hw>]:BB:DM:DLISt:CATalog? on page 731
[:SOURce<hw>]:BB:DM:CLISt:CATalog? on page 731
Functions for handling of data lists
Provided are the following standard functions for file handling:
"Select"
Select and load the file.
Remote command:
[:SOURce<hw>]:BB:DM:DLISt:SELect on page 731
Refer to the descriptions of the firmware options for the correct syntax of the corre-
sponding SCPI command:
[:SOURce<hw>]:BB:<Digital Standard>:...:DATA DLISt
[:SOURce<hw>]:BB:<Digital Standard>:...:DSELect
"New"
Creates file with the specified "Filename".
To confirm, select "OK"; use "Cancel" to undo the operation.
To edit the file content, select "File Select > Edit".
"Edit"
Accesses the "Data List Editor" and loads the selected file for editing
See Chapter 3.5.3.7, "Data List Editor", on page 128.
Functions for handling of control lists
Provided are the following standard functions for file handling:
"Select"
Select and load the file.
Remote command:
[:SOURce<hw>]:BB:DM:CLISt:SELect on page 731
"New"
Creates file with the specified name. To edit the file content, select
"File Select > Edit".
"Edit"
Access the "Control List Editor" and loads the selected file for editing,
see Control and Marker Lists Editor.
Recent files
Displays the files last used.
File Manager
Accesses the "File Manager" dialog, see Chapter 9.8, "Using the File Manager",
on page 491.
Accessing Files with User Data