General Instrument Functions
R&S
®
SMBV100B
544User Manual 1178.4460.02 ─ 03
The activated LAN services are not activated until you enter the "Security Password"
on page 544 and confirm with Accept.
LAN
Enables the LAN interface in general, and thus provides remote access via all
unlocked services.
Enable LAN Services individually
Enables or disables the following interface services individually.
"SCPI over LAN"
Activates access over LAN to control the instrument remotely, by
using SCPI (Standard Commands for Programmable Instruments)
commands.
See also "Starting a remote control session over LAN with R&S VISA"
on page 583.
"VNC"
Activates access via VNC (Virtual Network Computing) interface, a
graphical desktop sharing system that uses RFB protocol to control
the instrument remotely.
See also Chapter 11.16, "How to Set Up Remote Operation via VNC",
on page 599.
"SSH"
Activates access via SSH (Secure Shell), a network protocol for
secure data communication.
"HTTP"
Activates access via HTTP (Hyper Text Transfer Protocol), the appli-
cation protocol for hypermedia information systems.
"FTP"
Activates access via FTP (File Transfer Protocol), used to transfer
files from a host to the instrument and vice versa.
See also Chapter 9.9.2, "Accessing the File System of the
R&S SMBV100B Via ftp", on page 499.
"SMB (Samba)"
Activates access to SMB (Server Message Block), used for providing
shared access to files, printers and serial ports of a network.
See also Chapter 9.9.3, "Accessing the R&S SMBV100B File System
Via SMB (Samba)", on page 500.
"Avahi (Zeroconf)"
Activates Avahi, a service for automatic configuration of the instru-
ment in a network environment.
"Software Update"
Allows updating the software.
Security Password
Enters the password that is required to enable or to disable the settings protected by a
security password. Default is 123456.
Note:
●
We recommend that you change the default security password before connecting
the instrument to the network.
●
The security settings are not assigned until you select the "Accept" button.
Using the Security Settings
To Next Page
Loading...
