Getting Started
R&S
®
SMBV100B
68User Manual 1178.4460.02 ─ 03
The more complex the digital standard itself is, the more comprehensive the further
dialog and tab structure. The start dialog of each digital standard, however, follows
a repeating dialog structure that comprises the tabs "General", "Trigger In",
"Marker" and "Clock". (See also Chapter 2.5.3.4, "Additional Display Characteris-
tics", on page 78).
Tip: To display the dialog in its maximal height, press the Resize window key on
the front panel.
3. In the "EUTRA/LTE General" tab, select "Test Models".
The test models is a function for quick selection and settings adjustment according
to one of the various EUTRA test models (E-TM).
A standard "File Select" function enables you to select form files with predefined
settings.
Tip: On the front panel, press the Help key to retrieve detailed information on the
current settings and on the contents of the predefined files.
4. Navigate to a file, for example to the E-TM1_1__10MHz (an E-TM1.1 test model
with 10 MHz channel bandwidth) and confirm with "Select".
The dialog closes automatically and the user interface confirms the name of the
selected file.
5. In the "EUTRA/LTE > General" tab, select "State > On".
Trying Out the Instrument
To Next Page
Loading...
