Getting Started
R&S
®
SMBV100B
69User Manual 1178.4460.02 ─ 03
Close the dialog.
6. On the "Status Bar", tap the "Frequency" and "Level" fields and enter new values,
for example 2.1432
GHz and -20
dBm.
Select "RF > On".
The instrument generates an EUTRA/LTE test signal with the selected channel
bandwidth, frequency, and level.
With these first steps, you have gained an impression of the provided functionality.
For a comprehensive description of the full range of capabilities, refer to the user man-
ual "EUTRA/LTE Digital Standard for R&S SMBV100B".
Trying Out the Instrument
To Next Page
Loading...
