Rohde & Schwarz SMBV100B - Page 752

Remote Control Commands
R&S
®
SMBV100B
750User Manual 1178.4460.02 ─ 03
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CATalog?.......................................................... 750
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CATalog:LENGth?..............................................750
[:SOURce<hw>]:BB:ARBitrary:WAVeform:SELect..............................................................750
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DELete............................................................. 751
[:SOURce<hw>]:BB:ARBitrary:WAVeform:FREE?..............................................................751
[:SOURce<hw>]:BB:ARBitrary:WAVeform:POINts?............................................................751
[:SOURce<hw>]:BB:ARBitrary:WAVeform:DATA................................................................751
[:SOURce<hw>]:BB:ARBitrary:WAVeform:TAG?................................................................752
[:SOURce<hw>]:BB:ARBitrary:CLOCk............................................................................. 753
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CLOCk............................................................. 753
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CATalog?
Reads out the files extension *.wv in the default directory.
Return values:
<Catalog> string
Returns a list of the file names separated by commas
Example: see Example "Managing waveform files" on page 738
Usage: Query only
[:SOURce<hw>]:BB:ARBitrary:WAVeform:CATalog:LENGth?
Reads out the files with extension *.wv in the default directory and returns the number
of waveform files in this directory. The default directory is set using command
MMEM:CDIRectory.
Return values:
<Length> integer
Number of waveform files in default directory
Range: 0 to INT_MAX
*RST: 0
Example: see Example "Managing waveform files" on page 738
Usage: Query only
[:SOURce<hw>]:BB:ARBitrary:WAVeform:SELect <Filename>
Selects an existing waveform file, i.e. file with extension *.wv.
Parameters:
<Filename> string
Example: See Example "Managing waveform files" on page 738
Manual operation: See "Load Waveform/File" on page 152
SOURce Subsystem